Ultra quiet, low hand arm vibration, easy to use, superb balance and control and easy pull back for accurate alignment of next run are some of the features of this range of dedicated battery mowers. Available with a standard front roller for maintaining fine turf sports surfaces or with a larger diameter front roller, becoming the ideal mower for maintaining ornamental lawns and gardens.
A range of ultra quiet, low vibration and easy to use battery mowers that builds upon many of Dennis proven designs. Available with 7 or 10 bladed cylinders, these mowers provide maximum performance whether cutting around complex shaped lawns or sporting surfaces that require a fine cut.
Specification | ES-20 | ES-24 | ES-26 |
---|---|---|---|
Cutting Width | 510mm (20”) | 610mm (24”) | 660mm (26”) |
Height of Cut | 3mm – 30mm | ||
Power Source/Output | 48V battery system |
Dennis is set to make a significant impact at GroundsFest 2024, showcasing an impressive range of battery-powered products on stand 50 in Hall 2 at Stoneleigh Park, Warwickshire, on September 10 and 11.
Dennis Mowers is set to make a significant impact at BTME 2024, in a new stand position, taking place at the Harrogate Convention Centre from January 23 to 25.
Dennis will be showcasing a wide-range of pedestrian battery-powered products on stand 50 in hall 2 at GroundsFest 2023.
Dennis and SISIS will be introducing their new and exciting range of environmentally friendly turf maintenance machinery to the golf market at BTME 2022.
British manufacturers Dennis and SISIS have chosen SALTEX 2021, to be held at the NEC Birmingham on 3 and 4 November, to showcase the E-Series - a new range of battery-powered turf maintenance equipment.
The cutting widths; ES-20 = 20'' (510mm), ES-24= 24'' (610mm), ES-26= 26'' (660mm)
The mowers use a 48V, 1.5kWh lithium-ion battery pack, designed for high-discharge rates and extended runtime.
The ES-20, ES-24 and ES-26 are capable of cutting in excess of 10km of turf per charge under normal operating conditions.
Approximately 2–3 hours using the supplied high-efficiency charger.
3mm to 30mm
Models can be fitted with 7-blade or 10-blade cylinders for different clip rates and turf conditions.
Yes – the mowers have an integrated back lapping function accessible via control panel input, eliminating the need for external drive units
No - this is a toolless change so HOC can be changed in the middle of the pitch- easy click height adjustment
No - these models are cutting units only. Check out the ES-510 and ES-610 for an interchangeable cartridge mower.